virtual booth

Auto I-lock
2-Point Contact
Floating B to B
Z-Move: The Auto I-Lock Connector's structure automatically locks when the FPC/FFC is inserted. IRISO's proprietary structure makes it easy to unplug, but not easy to disconnect.

FPC/FFCを挿入すると自動にロックがかかる構造を持つコネクタ。抜けにくいのに外しやすいイリソ独自のカード抜け防止構造。

2-Point Contact Connector has two contacts on the same line. This structure helps in the removal of foreign substances such as suspended matter and scattered flux.

同一線上に二つの接点を持つ構造のコネクタ。浮遊物や、飛散したフラックスなどの異物の除去に貢献する。

Board-to-Board (BtoB) Connector has a "floating function" that is able to move in the X and Y directions when mated. It has the capability to absorb positional deviation of the board to reduce stress on the soldered area.

嵌合時にX、Y方向に可動する「フローティング機能」を持つ基板対基板用（BtoB）コネクタ。基板の位置ズレを吸収し、はんだ付部のストレスを軽減させる。

The Z-Move Connector can be moved in the Z direction in addition to the X and Y directions. Even if it shifts after the original fitting, the contact does not move. This allows the component to be mounted on vehicles as it helps meet important safety standards.

Ｘ、Ｙ方向の他、Ｚ方向にも可動するコネクタ。嵌合後共振しても、接点は動かない構造。車載搭載可能な重要保安部品基準をクリア。

WHY IRISO?

Factory Tour

Z-Move Technology

Connector for High Speed

Robot Assembly Connector

Application

Back

Connector

⬆︎ Click here to see the Connector !!

Floating B to B Floating B to B: Board-to-Board (BtoB) Connector has a "floating function" that is able to move in the X and Y directions when mated. It has the capability to absorb positional deviation of the board to reduce stress on the soldered area.

嵌合時にX、Y方向に可動する「フローティング機能」を持つ基板対基板用（BtoB）コネクタ。基板の位置ズレを吸収し、はんだ付部のストレスを軽減させる。

2-Point Contact 2-Point Contact: 2-Point Contact Connector has two contacts on the same line. This structure helps in the removal of foreign substances such as suspended matter and scattered flux.

同一線上に二つの接点を持つ構造のコネクタ。浮遊物や、飛散したフラックスなどの異物の除去に貢献する。

Z-Move Z-Move: The Z-Move Connector can be moved in the Z direction in addition to the X and Y directions. Even if it shifts after the original fitting, the contact does not move. This allows the component to be mounted on vehicles as it helps meet important safety standards.

Ｘ、Ｙ方向の他、Ｚ方向にも可動するコネクタ。嵌合後共振しても、接点は動かない構造。車載搭載可能な重要保安部品基準をクリア。

FPC/FFC FPC/FFC: These conectors are used to connect the FPC (Flexible Printed Circuit) or FFC (Flexible Flat Cable) to the PCB (Printed Circuit Board). They are available in both ZIF (Zero Insertion Force) and LIF (Light Insertion Force) cable locking styles.

FPC(フレキシブル基板)やFFC (フレキシブルフラットケーブル)と、基板を接続するためのコネクタ。ほとんど力を加えずFPC/FFCをロック可能なZIFタイプ、軽いカで挿入可能なNON-ZIFタイプを用意。

Auto I-lock Auto I-lock: The Auto I-Lock Connector's structure automatically locks when the FPC/FFC is inserted. IRISO's proprietary structure makes it easy to unplug, but not easy to disconnect.

FPC/FFCを挿入すると自動にロックがかかる構造を持つコネクタ。抜けにくいのに外しやすいイリソ独自のカード抜け防止構造。

I/F I/F: The I/F Connector is suited for connecting information and signals between devices. It enables power supply to devices and the input/output of audio/video signal data. It is also referred to as an I/O Connector.

機器間の情報・信号の接続を行うコネクタ。機器への電源供給、音声・映像信号データなどの入出力を可能とする。I/Oコネクタとも呼ばれる。

Socket Socket: The Socket connector is widely used for connecting devices or for internal connections in combination with a pin header (plug). It is also used for LCD connections within in-vehicle electrical equipment and connecting the board with HDD(Hard Disk Drive).

ピンヘッダー（プラグ）との組み合わせにより、機器間の接続、内部接続に広く使用されるコネクタ。車載電装機器のLCD接続、基板とHDDの接続用としても搭載される。

Top View

Overall

Welcome to IRISO's Virtual Booth

virtual booth

How to use the 3D exhibition booth